Ariens 22-Ton Log Splitter Especificaciones descargar pdf (Pagina 20)

6. Check the fluid level in the hydraulic tank and add oil as needed.

Be careful not to spill fuel when filling the engine. If fuel should spill,

quickly wipe off and allow the excess fuel to evaporate before continu-

ing. Fuel and fuel vapors are highly flammable and can cause personal

injury or even death when ignited.

Important Notice

If your log splitter is equipped with a factory installed engine, do not mix oil

with the gasoline. Using mixed oil/gasoline in a four cycle engine can cause

engine damage.

7. Fill the engine’s fuel tank with fresh, clean, lead-free automotive gasoline.

8. Attach the spark plug wire and start the engine per the manufacturer’s instructions.

9. With the engine running, push the valve control handle to the retract position and

retract the cylinder piston. The cylinder valve will automatically stop the cylinder from

retracting when it reaches the end of its stroke. Cycle the log splitter several times.

10. Again, check the fluid level in the hydraulic tank and add oil as needed. Replace

and tighten the fill cap.

11. Your log splitter is now ready to use.

WARNING

Iron & Oak 18 815-672-8596

Start-Up Procedure

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Sin comentarios

Ariens 22-Ton Log Splitter Especificaciones Pagina 20